The MART Corporation

| Home | Contact |

MART Products


Hand Rinse Wand

Enables manual rinsing of spot areas after a wash cycle. Rinse Wand consists of an extended tube and 2 GPM fan-shaped spray nozzle attached to a gun-shaped handle and trigger, and connected to a fresh water supply with a length of hose. When operator depresses the trigger, fresh water from the supply line is released through the nozzle at incoming line pressure. During normal operation rinse water is returned to the Solution Reservoir. A solenoid valve, connected to the Solution-Level Control System, disables Rinse Wand when solution level is at its High (maximum) Mark. Light on Control Panel indicates High Mark condition. NOTE: Rinse water from the wand is not heated, and contains no chemicals.

Back to Options


Industry Leader in Aqueous Parts Washer Technology

©2003 The MART Corporation. All Rights Reserved.

| About MART® | Industries & Application | Products | Technology | Owner Services | Articles | Contact |