| Home | Contact |

MART Products



Parts Washer Specifications

HURRICANE 100 Clamshell Style
Engineered to clean extremely large loads like 3516 Caterpillar engines, the Hurricane 100 is also available in a clamshell style that has load capacities of 20,000 to 60,000 lbs.



HURRICANE 100 Clamshell Style


request quote / info

Features & General Construction:
 

Closed Loop Zero Discharge

Standard

Wash Pump Suction Strainer

Standard

Adjustable Thermostat

Standard

Temperature Gauge

Standard

24 Hour 7 Day Clock

Standard

Low Water System Shut-Off

Standard

Door Safety Interlock

Standard

Wash Cycle Timer

Standard

Sheet Steel Cabinet Thickness

1/4 inch

230 V or 460 V 60 Hz, 3-Ph Controls

Standard

Automatic Water Level Control & Refill

Standard


Power Blast Manifold:

 

OSCILLATING NON-SYNCHRONOUS

       

Angle of Oscillation

40 degrees

Frequency of Oscillation

4 per minute

Number of Wash Nozzles

24

Type of Nozzle

Vee-Jet

Nozzle Material

316 Stainless

Nozzle Spray Pattern

25 degrees

   

Overall Dimensions:

 

Width ( Standard Unit )

156 inches

Depth ( Standard Unit )

132 inches

Height

139 inches 

Empty Weight

18,000 lbs

Reservoir Capacity

920 gallons

Duplex Reservoir Add 47 gallons

Sludge Capacity

260 gallons

   

Work Area Dimensions:

 

Turntable Diameter

100 inches

Work Height

73 inches

Table Load Capacity

15,000 lbs

Heavy Duty Capacity

20,000 lbs
          

Heat System:

 

Operating Temperature

140-180 degrees F

Initial Heat-Up Time

45-60 Minutes

Element Size

120 kW

         

Electrical:

 

Motor Rating

Continuous Duty

Motor Starters

Across the Line

Enclosures

TEFC

Short Circuit Protection

Standard

Enclosures

NEMA 12

Overall Protection

Standard

Wiring Conduit

Flex Non-Metallic

Motor Type

Industrial

Type of Conduit

Liquidtight NEMA 12

         

Pump System & Performance:

 

High Efficiency, Rated for continuous duty (20 Start/hour without overheating), vertical, centrifugal, seal-less, balanced, enclosed impeller.  Note:  All performance data taken at nozzle tip.

       

       
Standard:
30 Horsepower
Total System Flow 343 gpm
Flow per Nozzle 14.3 gpm
System Pressure 121 psi
Blast Velocity 133 ft/sec
Upgrades:
55 Horsepower (Duplex)
Total System Flow 399 gpm
Flow per Nozzle 16.6 gpm
System Pressure 163 psi
Blast Velocity 155 ft/sec
         
70 Horsepower (Duplex)
Total System Flow 431 gpm
Flow per Nozzle 18.0 gpm
System Pressure 190 psi
Blast Velocity 168 ft/sec
         
         
Optional Features:
 
  • 20,000 lb turntable
  • Short High Impact Manifold (SHIM)
  • Pump Sound Insulation
  • Pump Amp Meter
  • Cabinet Thermal Insulation
  • Auto Rinse Cycle (includes ASE)
  • Auto Steam Exhaust (ASE)
  • Rust Inhibitor Injector Pump
  • Steam Exhaust PVC Kit
  • High Output Electric Heat + 40 kW
  • Internal Reservoir Cover
  • Remote Grease Fittings
  • Auto Oil Skimmer
  • Heated Oil Skimmer
  • Sludge Drag -Out Conveyor + 10" to ht
  • Parts Basket - large pore with lid
  • 5,000 lb Ratchet Strap to secure parts
  • Turntable Fixture Kit
  • Hot Air Blow-Off 5 hp and 60 kW
  • Hour Meter
  • Turntable Jog
  • Gas Heat Source
  • EQ-1 Wastewater Treatment System
  • Industrial Control Package
  • Stretched Machine Wk Height Mild Steel
  • Stretched Machine Work Height Stainless Steel
  • Stainless Steel Cabinet
  • Stainless Steel Heat Exchanger
   

* NOTE: All Models available in Load Capacities Two to Three Times Greater



Industry Leader in Aqueous Parts Washer Technology

©2003 The MART Corporation. All Rights Reserved.

| About MART® | Industries & Application | Products | Technology | Owner Services | Articles | Contact |