| Home | Contact |
MART Products



Parts Washer Specifications

HURRICANE 72 Retractable Turntable
Washes Locomotive Traction Motor assemblies before dismantling and washes individual Traction Motor Components. Also thoroughly cleans Ink and Paint Tubs and Totes for recycling and reuse.

  


request quote / info
Features & General Construction:
 

Closed Loop Zero Discharge

Standard

Wash Pump Suction Strainer

Standard

Adjustable Thermostat

Standard

Temperature Gauge

Standard

24 Hour 7 Day Clock

Standard

Low Water System Shut-Off

Standard

Door Safety Interlock

Standard

Wash Cycle Timer

Standard

Sheet Steel Cabinet Thickness

1/4 inch

230 V or 460 V 60 Hz, 3-Ph Controls

Standard

Automatic Water Level Control & Refill

Standard


Power Blast Manifold:

 

OSCILLATING NON-SYNCHRONOUS

       

Angle of Oscillation

33 degrees

Frequency of Oscillation

4 per minute

Number of Wash Nozzles

24

Type of Nozzle

Vee-Jet

Nozzle Material

316 Stainless

Nozzle Spray Pattern

25 degrees

   

Overall Dimensions:

 

Width ( Standard Unit )

137 inches

Depth ( Standard Unit )

106 inches

Height

133 inches 

Empty Weight

14,000 lbs

Reservoir Capacity

550 gallons

Duplex Reservoir Add 47 gallons

Sludge Capacity

100 gallons

   

Work Area Dimensions:

 

Turntable Diameter

72 inches

Work Height

73 inches

Table Load Capacity

15,000 lbs

Heavy Duty Capacity

20,000 lbs
          

Heat System:

 

Operating Temperature

140-180 degrees F

Initial Heat-Up Time

60-120 Minutes

Element Size

60 kW
120 kW

     
         

Electrical:

 

Motor Rating

Continuous Duty

Motor Starters

Across the Line

Enclosures

TEFC

Short Circuit Protection

Standard

Enclosures

NEMA 12

Overall Protection

Standard

Wiring Conduit

Flex Non-Metallic

Motor Type

Industrial

Type of Conduit

Liquidtight NEMA 12

         

Pump System & Performance:

 

High Efficiency, Rated for continuous duty (20 Start/hour without overheating), vertical, centrifugal, seal-less, balanced, enclosed impeller.  Note:  All performance data taken at nozzle tip.

       

       
Standard:
30 Horsepower
Total System Flow 343 gpm
Flow per Nozzle 14.3 gpm
System Pressure 121 psi
Blast Velocity 133 ft/sec
Upgrades:
55 Horsepower (Duplex)
Total System Flow 399 gpm
Flow per Nozzle 16.6 gpm
System Pressure 163 psi
Blast Velocity 155 ft/sec
         
70 Horsepower (Duplex)
Total System Flow 431 gpm
Flow per Nozzle 18.0 gpm
System Pressure 190 psi
Blast Velocity 168 ft/sec
         
Optional Features:
 
  • 20,000 lb Turntable
  • Short High-Impact Manifold (SHIM)
  • Pump Sound Insulation
  • Pump Amp Meter (Simplex Pump)
  • Cabinet Thermal Insulation
  • Auto Rinse Cycle (includes ASE)
  • Auto Steam Exhaust (ASE)
  • Rust Inhibitor Injector Pump
  • Steam Exhaust PVC Kit
  • High Output Electric Heat +20 kW
  • Internal Reservoir Cover
  • Remote Grease Fittings
  • Auto Oil Skimmer
  • Heated Oil Skimmer
  • Sludge Drag-Out Conveyor ( + 10" to all heights)
  • Part Basket- Large pore with lid
  • Jib Boom with Trolley
  • 5,000 lb Ratchet Strap to secure parts
  • Turntable Fixture Kit
  • Hot Air Blow-Off 3 hp and 30 kW
  • Hour Meter
  • Turntable Jog
  • Gas Heat Source
  • EQ-1 Wastewater Treatment System
  • Industrial Control Package
  • Stretched Machine Work Height Mild Steel
  • Stretched Machine Work Height Stainless Steel
  • Stainless Steel Cabinet Wetted Parts
  • Stainless Steel Pump
  • Stainless Steel Heat Exchanger
   

* NOTE: All Models available in Load Capacities Two to Three Times Greater

Industry Leader in Aqueous Parts Washer Technology
©2003 The MART Corporation. All Rights Reserved.

| About MART® | Industries & Application | Products | Technology | Owner Services | Articles | Contact |