The MART Corporation

| Home | Contact |

MART Products

Parts Washer Specifications

TORNADO 60 Retractable Turntable
This powerful parts washer is popular with DC and AC electric motor rebuilders and larger diesel transmission and carrier rebuild shops.  It is also used by blenders of ink and paint to wash tubs, totes and pails thoroughly and cost effectively.  This model is available with single or dual lift doors for manual or automated operation. 


TORNADO 60 Retractable Turntable

request quote / info

Features & General Construction:

Closed Loop Zero Discharge



Wash Pump Suction Strainer



Adjustable Thermostat



Temperature Gauge



24 Hour 7 Day Clock



Low Water System Shut-Off



Door Safety Interlock



Wash Cycle Timer



Sheet Steel Cabinet Thickness

7 ga


230 V or 460 V 60 Hz, 3-Ph Controls



Automatic Water Level Control & Refill




Power Blast Manifold:




Angle of Oscillation

39 degrees


Frequency of Oscillation

4 per minute


Number of Wash Nozzles



Type of Nozzle



Nozzle Material

316 Stainless


Nozzle Spray Pattern

25 degrees


Overall Dimensions:


Width ( Standard Unit )

106 inches


Depth ( Standard Unit )

91 inches    


93 inches     

Empty Weight

6,650 lbs


Reservoir Capacity

350 gallons

Duplex Reservoir Add 47 gallons    

Sludge Capacity

80 gallons


Work Area Dimensions:


Turntable Diameter

60 inches


Work Height

48 inches


Table Load Capacity

4,000 lbs


Heavy Duty Capacity

7,000 lbs    

Heat System:


Operating Temperature

140 - 180 degrees F


Initial Heat-Up Time

45 - 60 minutes


Element Size

60 kW




Motor Rating

Continuous Duty


Motor Starters

Across the Line





Short Circuit Protection






Overall Protection



Wiring Conduit

Flex Non-Metallic


Motor Type



Type of Conduit

Liquidtight NEMA 12


Pump System & Performance:


High Efficiency, Rated for continuous duty (20 Start/hour without overheating), vertical, centrifugal, seal-less, balanced, enclosed impeller.  Note:  All performance data taken at nozzle tip.


20 Horsepower    
Total System Flow 269 gpm    
Flow per Nozzle 13.5 gpm    
System Pressure 107 psi    
Blast Velocity 126 ft/sec    
30 Horsepower    
Total System Flow 301 gpm    
Flow per Nozzle 15.1 gpm    
System Pressure 134 psi    
Blast Velocity 141 ft/sec    
40 Horsepower    
Total System Flow 319 gpm    
Flow per Nozzle 16 gpm    
System Pressure 150 psi    
Blast Velocity 149 ft/sec    
55 Horsepower    
Total System Flow 356 gpm    
Flow per Nozzle 17.8 gpm    
System Pressure 187 psi    
Blast Velocity 166 ft/sec    
70 Horsepower    
Total System Flow 371 gpm    
Flow per Nozzle 18.6 gpm    
System Pressure 203 psi    
Blast Velocity 173 ft/sec    
Optional Features:    
  • Turntable upgrade to 7,000
  • Short High Impact Manifold (SHIM)
  • Pump Sound Insulation
  • Pump Amp Meter
  • Cabinet Thermal Insulation
  • Auto Rinse Cycle (includes ASE)
  • Auto Steam Exhaust (ASE)
  • Rust Inhibitor Injector Pump
  • Steam Exhaust PVC Kit
  • High Output Electric Heat + 20 kW
  • Internal Reservoir Cover
  • Remote Grease Fittings
  • Auto Oil Skimmer
  • Heated Oil Skimmer
  • Sludge Drag Out Conveyor + 10" to ht
  • Parts Basket - large pore with lid
  • 5,000 lb Ratchet Strap to secure parts
  • Jib Boom with Trolley (5000 lb capacity)
  • Turntable Fixture Kit
  • Hot Air Blow-Off 3 hp and 30 kW
  • Hour Meter
  • Turntable Jog
  • Gas Heat Source
  • EQ-1 Wastewater Treatment System
  • Industrial Control Package
  • Stretched Machine Wk Height Mild Steel
  • Stretched Machine Work Height Stainless Steel
  • Stainless Steel Cabinet
  • Stainless Steel Heat Exchanger

* NOTE: All Models available in Load Capacities Two to Three Times Greater

Industry Leader in Aqueous Parts Washer Technology

©2003 The MART Corporation. All Rights Reserved.

| About MART® | Industries & Application | Products | Technology | Owner Services | Articles | Contact |